Its very interesting if we can make double side PCB by ourself. And ussually do it when i make my project. This tutorial Im intended for any body who want make their own PCB.
Material you will need :
1. Double side PCB , i sugest you to use fibre PCB
2. Plastic paper for laser printing
3. PCB drill, water spray (that can spray in moist mode)
After you has all this stuff, and then you ready to follow this step:
1. Prepare your PCS silkscreen, and print them with laser print (plastic paper) , dont forget to use mirror printing.
2. Prepare the blank PCB, and lay out the plastic paper on the blank PCB , you can do this for the bottom side first.
3. And the iron it , be carrefull , you must keep it so it isn melt.
4. Use water spray to spray the ironed PCB, spray with gently
5. Plastic paper will release by itself.
6. Now you can make hole for mark the top side
7. Do step 1 to 5 again to finish top side.
8. And ready for PCB etching.
9. Good Luck
No comments:
Post a Comment